waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and resources > Aquamist HFS-3 forum > HFS-3 wiring diagram to a specific model of car

Reply
 
Thread Tools Display Modes
  #11  
Old 26-01-2014, 10:53 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,898
Default Re: Mitsubishi EVO (USDM) wiring diagrams for HFS-3 (all US models)

2014 updated.... HFS3-v3 /Tephra patch

Richard
__________________
Richard L
aquamist technical support
Reply With Quote
  #12  
Old 13-03-2015, 04:53 PM
Chriswolf81 Chriswolf81 is offline
Junior Member
 
Join Date: Jan 2014
Location: US
Posts: 22
Default Re: Mitsubishi EVO (USDM) wiring diagrams for HFS-3 (all US models)

Hi Richard,

I'm confused: the diagram on this thread for Evo x tephra alt maps uses the black wire for failsafe ground with resistor, but the link you posted to Evom has the brown wire used for this. You sent me a diagram via email last year using the brown wire. My failsafe/map switching is not working. I used the diagram with the brown wire as the ground.

Please help very frustrated.

Thanks
Attached Images
File Type: jpg image.jpg (189.1 KB, 2 views)
Reply With Quote
  #13  
Old 13-03-2015, 06:15 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,898
Default Re: Mitsubishi EVO (USDM) wiring diagrams for HFS-3 (all US models)

There was some confusion on our part and the older diagram was drawn. Use the black wire. Please circulate this in forums for us.
__________________
Richard L
aquamist technical support
Reply With Quote
  #14  
Old 13-03-2015, 06:56 PM
Chriswolf81 Chriswolf81 is offline
Junior Member
 
Join Date: Jan 2014
Location: US
Posts: 22
Default Re: Mitsubishi EVO (USDM) wiring diagrams for HFS-3 (all US models)

Thank you Richard. I will let Tephra know and ask him to make the changes. I will mention it on the thread too.
Reply With Quote
  #15  
Old 13-03-2015, 07:13 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,898
Default Re: Mitsubishi EVO (USDM) wiring diagrams for HFS-3 (all US models)

I spoke to tephra a day or two ago and hence the new drawing.
__________________
Richard L
aquamist technical support
Reply With Quote
  #16  
Old 13-03-2015, 10:50 PM
Chriswolf81 Chriswolf81 is offline
Junior Member
 
Join Date: Jan 2014
Location: US
Posts: 22
Default Re: Mitsubishi EVO (USDM) wiring diagrams for HFS-3 (all US models)

I made the change to the black wire, but it is still not working. My ohm reading on the white failsafe wire changed from 2.8 to 1.5 when the car is off. As soon as I turn the key or start the car the display goes to 0.L with gauge on or off, no difference. When I change the multimeter to VDC it shows 4.7v with the gauge on and 1.7 with it off.
Reply With Quote
  #17  
Old 13-03-2015, 11:52 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,898
Default Re: Mitsubishi EVO (USDM) wiring diagrams for HFS-3 (all US models)

Can you measure the ohm of the following:

white/brown ........ car off and car on
white/black.......... car off and car on
__________________
Richard L
aquamist technical support
Reply With Quote
  #18  
Old 14-03-2015, 12:07 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,898
Default Re: Mitsubishi EVO (USDM) wiring diagrams for HFS-3 (all US models)

Here is the truth table of the white, black and brown. Can you check some of those contents the table

__________________
Richard L
aquamist technical support
Reply With Quote
  #19  
Old 14-03-2015, 02:41 AM
Chriswolf81 Chriswolf81 is offline
Junior Member
 
Join Date: Jan 2014
Location: US
Posts: 22
Default Re: Mitsubishi EVO (USDM) wiring diagrams for HFS-3 (all US models)

Thanks Richard. I'm not understanding the instructions. I'm not very knowledgable with electronics. What does it mean when you say white/brown and white/black? Does that mean red multimeter cable to the white wire and the black multimeter cable to either the brown or black wire respectively?

How do I test the truth table? Sorry for being so slow in understanding this stuff. I'm not sure how to tell if I'm on on normal mode or failsafe, nothing ever changes.

Thanks
Reply With Quote
  #20  
Old 14-03-2015, 07:50 AM
tephra tephra is offline
Junior Member
 
Join Date: Sep 2009
Posts: 3
Default Re: Mitsubishi EVO (USDM) wiring diagrams for HFS-3 (all US models)

so basically. if you disconnect the brown/white and black wires from the chassis/ecu, and then test them you should find that:

with the gauge OFF =
OMH meter between white and black should show 0ohms or thereabouts (ie some continuity)
OMH meter between white and brown should show not-connected or thereabouts (ie no continuity)

with the gauge ON =
OMH meter between white and black should show not-connected or thereabouts (ie no continuity)
OMH meter between white and brown should show 0 ohms or thereabouts (ie some continuity)

if we can at least establish that baseline then we can move forwards.

^ all assuming you have DFS unlinked, FS0 linked?? and power to the HFS3 ...

Also FYI a reading of '0.L' implies NO continuity, it's not the same thing as 0 ohms...

Last edited by tephra; 14-03-2015 at 08:02 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:21 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.