#11
|
|||
|
|||
Re: Nozzle spray angle...
Quote:
injection points, all in bends and arranged to spray axial to the following tube. One will be in the bend before the charger, one in the first bend after the charger, and one in the last bend before the engine inlet manifold. This will give the choice of 1, 2 or 3 nozzles spraying simultaneously. I will also drill, tap and plug the inlet runners (straight up) to allow for the installation of port injection when it becomes necessary. I have selected one each of standard nozzles 0.70, 0.50 and 0.40B to begin, and will order more once initial tuning with water is under way. I think water only should be sufficient to reach 10psi ? If not, I will change to 25-35% methanol mix. Once again thanks to you and rotrex for your guidance Cheers... jondee86 |
|
|