waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Intercooler Effects

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 15-09-2013, 01:16 PM
stevieturbo stevieturbo is offline
Senior Member
 
Join Date: Nov 2005
Location: Northern Ireland
Posts: 80
Default Re: injecting hot side

If you are only using pump fuel and because of this are severely knock limited, then I would just go with the typical WI setup and inject between the IC and intake valves.

I only posted the question to deal with charge air temperatures only. Nothing as to what might happen in the chamber, which is a key aim of a more typical WI installation.

Good info there though. Even at 40psi boost, water would still boil off at 130degC. So water should remove a fair chunk of heat if injected hot side.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:38 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.