waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Gasoline Forced-Induction

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 30-05-2019, 11:07 PM
Autosri Autosri is offline
Junior Member
 
Join Date: Aug 2011
Location: Leicester
Posts: 3
Default Jet size and quantity for N54

Hi I’ve just picked up my new car and it’s got an N54 engine I’m looking to get around 450hp out of the stock turbos and keep a decent intake temp

I’ve got a bit of a mish mash system I removed from my old car I’d like to reuse for a while it’s a 250psi pump with the relief style regulator and a home made arduino base controller
On my last car I used a 0.5mm jet with a 50/50 mix just as a safety margin

I’m looking to install this kit onto the new car but I’m not sure what size Jets to run of how many as it’s direct injection so can’t use the total injector and 15-20percent method

Also is it better to run one big jet or 2 smaller ones for the best atomisation


Thanks
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 12:04 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.