Go Back   waterinjection.info > Aquamist specific system Q and A and resources > Aquamist HFS-3 forum

Thread Tools Display Modes
Old 17-03-2019, 09:45 AM
Richard L Richard L is offline
Manufacturer sponsor
Join Date: Oct 2003
Location: England
Posts: 4,914
Default Re: Flickering blue light ?

what is the maximum F-IDC% you are running now? if it is not near 90%, you may need to rescale the incoming iDC so the THRES is more effective at the lower end.
Try set the IDC prescaler to x1.25
Richard L
aquamist technical support
Reply With Quote
Old 19-03-2019, 11:27 AM
jondee86 jondee86 is offline
Join Date: Dec 2015
Location: New Zealand
Posts: 78
Thumbs up Re: Flickering blue light ?

Thanks Richard. I now have a better understanding of how the system
works and how the controls and hardware choices interact. I accept that
my application as it currently sits is not ideal for the HFS-3. So for the
moment I have reverted to my original restrictor/nozzle setup and using my
ECU to switch the pump relay. This allows flow to vary with IDC sufficiently
well for my purpose... namely provide some charge cooling in the absence
of an intercooler.

Fortunately, the engine can be driven quite hard without the W/M system
operating, as I discovered today when I went for a test drive and forgot to
activate the AUX output for the pump when I loaded an old tune

I shall now review what I have learned from swapping things around over
the last month, do some more testing and then decide how to configure the
system to give me the best result.

Cheers... jondee86
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 03:25 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.