waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Diesel

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 26-09-2004, 04:08 AM
Sticks Sticks is offline
Junior Member
 
Join Date: Feb 2004
Posts: 13
Default Dyno results from Ft Collins Colorado

Elev 5200 feet, Weater - 70* sunny, dry.

My Truck, 2002 Dodge Ram 3500 5.9 Cummins CTD, High Output, 6 speed transmission, 3:54 rear end, stage II(80hp) fuel injectors, Snow Performance Stage I kit with a stage II variable controller set at 15psi for 50% and 22psi for 100%.


Run # 1 was on #2 only, and the edge EZ as a boost fooler.
262.46 hp 599.04 tq

Dyno run / Gain over EZ / Gain over Previous fluid

Run #2 (not shown) Edge EZ only.
328 hp 835 tq
Run #4 was Edge EZ on level 2, and straight water injection.
332.7 hp / 4.7 hp / 4.7 hp
846.96 tq / 11.96 tq / 11.96 tq
Run #5 was Edge EZ, and your average off the shelf windshield washer fluid injection.
381.47 hp / 53.47 hp / 48.77 hp
884.83 tq / 49.83 tq / 37.87 tq
Run #6 was Edge EZ, and 50/50 mix of Water to Methanol.
392.25 hp / 64.25 hp / 10.78 hp
891.91 tq / 56.91 tq / 7.08 tq
http://www.turbodieselregister.com/u...=15167&width=2

The above link will take you to a scan of my dyno sheet.
__________________
Sticks

02 Dodge 3500 5.9 Cummins, 3:54, 4x4, AFE Intake, US-Gear SD E-brake, PIF-EZ, PIF-Snow Performance W/M injection, Stage II fuel injectors

Will work for a hybrid turbo!
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:57 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.