waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-6 forum

Reply
 
Thread Tools Display Modes
  #21  
Old 02-10-2014, 06:52 PM
vsgts14 vsgts14 is offline
Junior Member
 
Join Date: Jun 2014
Location: Phillipsburg, NJ
Posts: 15
Default Re: hfs6 problems

ok rich, is that the only thing i have to do, and then the system will work properly?
Reply With Quote
  #22  
Old 02-10-2014, 08:58 PM
vsgts14 vsgts14 is offline
Junior Member
 
Join Date: Jun 2014
Location: Phillipsburg, NJ
Posts: 15
Default Re: hfs6 problems

hey rich, i connected those two wires and i'm not getting any spray using the test jumper. am i missing something?
Reply With Quote
  #23  
Old 04-10-2014, 12:24 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: hfs6 problems

send as picture of your connection work.
__________________
Richard L
aquamist technical support
Reply With Quote
  #24  
Old 04-10-2014, 02:40 PM
vsgts14 vsgts14 is offline
Junior Member
 
Join Date: Jun 2014
Location: Phillipsburg, NJ
Posts: 15
Default Re: hfs6 problems

Quote:
Originally Posted by Richard L View Post
send as picture of your connection work.
will do. basically, i crimped that brown wire to a new wire and soldered it onto the coil (the wire on it, was not long enough).

i tested all the voltages and it's getting voltage.
i also manually jumped a ground wire to the coil just to make sure the valve was not dead and it indeed does spray out.
Reply With Quote
  #25  
Old 04-10-2014, 06:46 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: hfs6 problems

If you use the TST to activate the system. The other jumper link must be on IDC.
__________________
Richard L
aquamist technical support
Reply With Quote
  #26  
Old 04-10-2014, 09:15 PM
vsgts14 vsgts14 is offline
Junior Member
 
Join Date: Jun 2014
Location: Phillipsburg, NJ
Posts: 15
Default Re: hfs6 problems

Quote:
Originally Posted by Richard L View Post
If you use the TST to activate the system. The other jumper link must be on IDC.
i had them on MPS/IDC/TEST.

the car was tuned yesterday, with all the jumpers etc set as if it would be tuneable, but nothing happened. there's a fault somewhere.

should all the RJ connections have a green light lit?
Reply With Quote
  #27  
Old 08-10-2014, 05:31 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: hfs6 problems

Time for a new system?
__________________
Richard L
aquamist technical support
Reply With Quote
  #28  
Old 08-10-2014, 05:39 PM
vsgts14 vsgts14 is offline
Junior Member
 
Join Date: Jun 2014
Location: Phillipsburg, NJ
Posts: 15
Default Re: hfs6 problems

at this point, it points that way correct? is there any way i can buy parts and convert this one to say an HFS3? i mean, the pump wiring is the same, the gauge is the same, the power supply is the same. i would need the control box and injection box.
Reply With Quote
  #29  
Old 16-10-2014, 07:49 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: hfs6 problems

None of the connectors are the same. It will be a mess if you to it this way. You can get the H3 system from me minus the pump. Email me.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:33 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.