waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and resources > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #11  
Old 24-10-2019, 06:55 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,897
Default Re: Failsafe didn't catch a no flow jet

stop guessing, pull the jets out and do a spray test, using the SYS jumper.
__________________
Richard L
aquamist technical support
Reply With Quote
  #12  
Old 24-10-2019, 11:57 PM
Craigorypeck Craigorypeck is offline
Junior Member
 
Join Date: Jan 2019
Location: Alberta
Posts: 12
Default Re: Failsafe didn't catch a no flow jet

I sure did. Twice.
Once in the initial setup and once after the knock on that cylinder.
Gonna try blocking a hose later see if it trips the failsafe.
Dyno went decent, up 80hp with the WMI.

Last edited by Craigorypeck; 25-10-2019 at 12:03 AM.
Reply With Quote
  #13  
Old 25-10-2019, 07:28 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,897
Default Re: Failsafe didn't catch a no flow jet

Thank you, it is so nice that you are able to do all the necessary work over there.
Decent 80hp gain!

When you do the spray test, was there a clogged jet?
__________________
Richard L
aquamist technical support
Reply With Quote
  #14  
Old 31-10-2019, 06:15 AM
Craigorypeck Craigorypeck is offline
Junior Member
 
Join Date: Jan 2019
Location: Alberta
Posts: 12
Default Re: Failsafe didn't catch a no flow jet

No more road time or testing... It snowed..
Car parked for winter, wife needs to park in the garage. Cover on- done ��.. Ffs.
Why did I move to Canada!?
Reply With Quote
  #15  
Old 06-11-2019, 10:36 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,897
Default Re: Failsafe didn't catch a no flow jet

see you in spring.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:15 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.