waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-6 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 07-03-2020, 10:07 PM
herrubermensch herrubermensch is offline
Junior Member
 
Join Date: May 2009
Location: New York
Posts: 2
Default Pinout for Red Connector to Flow Control Module

Yes, I know this system is old and has been superseded, but there are many of us who contend it is the best system Aquamist ever produced and so would like to continue using it.

At some point, I extended cord with the red connector from HFS-6 control unit to the FCM. Then when moving the unit from car to car, I lost the piece of the cord with the red RJ-45 connector and so need to replace it and splice it to the cord coming from the FCM. Can anyone provide me with the pinout for the red RJ-45 connector? Specifically, which color wires in the cord coming from the FCM go to which pins in the RJ-45 connector?

Thanks in advance.

--Peter
Reply With Quote
  #2  
Old 15-03-2020, 04:47 PM
herrubermensch herrubermensch is offline
Junior Member
 
Join Date: May 2009
Location: New York
Posts: 2
Default Re: Pinout for Red Connector to Flow Control Module

Anyone? Richard?

I noticed one can purchase a new red connector cord for the newer Aquamist units, but not sure the pinout is the same for the HFS-6.

--Peter
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:56 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.