waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Avoiding Disaster

Reply
 
Thread Tools Display Modes
  #1  
Old 20-01-2007, 09:21 PM
Jezz Jezz is offline
Junior Member
 
Join Date: Jan 2007
Location: South Wales
Posts: 9
Default Using Float to Failsafe with MF2.

Hi,

Can anyone tell me if there is a way of wiring up the reservoir float so that it triggers the fault circuit of the MF2?

Also, what fault scenarios can the MF2 detect when set up as per the method shown in the MF2 manual?



Many thanks,
Jezz.
Reply With Quote
  #2  
Old 21-01-2007, 06:16 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default

yes, I can help you on this. If you post any aquamist related topic to the aquamist section, you will get a faster reply. I check it quite regularly.

You can wire up the float switch across the 806-162 pressure switch, Upon inject, the fault led should come on. You will also disable the pump from priming itself to destruction when the tank is empted.
__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 21-01-2007, 06:27 PM
Jezz Jezz is offline
Junior Member
 
Join Date: Jan 2007
Location: South Wales
Posts: 9
Default

Sorry Richard, I couldn't decide which section would be best to put it in.

Thanks for the reply.
A nice simple solution too.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:50 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.