waterinjection.info  

Go Back   waterinjection.info > Water/Methanol database on specific model of cars > Your one-stop search for water/methanol injected cars

Reply
 
Thread Tools Display Modes
  #1  
Old 02-01-2017, 06:54 PM
Brd.Prey Brd.Prey is offline
Junior Member
 
Join Date: Dec 2016
Location: United States
Posts: 7
Default 2009 Audi TTS IE intake manifold install thread

Posting up the photos of how I decided to install my HFS4 system. I figured slightly longer direct port tubing would not cause and issues as they have check valves and a check valve down near the post IC jet.
Comments or observations or suggestions welcome.





















Reply With Quote
  #2  
Old 02-01-2017, 08:40 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,590
Default Re: 2009 Audi TTS IE intake manifold install thread

Very nice work. You can swap the vent outlet to the other side. (patient, long screw to undo and do up)

Looks really neat.
__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 02-01-2017, 09:19 PM
Brd.Prey Brd.Prey is offline
Junior Member
 
Join Date: Dec 2016
Location: United States
Posts: 7
Default Re: 2009 Audi TTS IE intake manifold install thread

Thanks any all feedback is appreciated. I was thinking that I would hear that the direct port feed was too long. I was hoping since the injectors had check valves it shouldnt matter?
Reply With Quote
  #4  
Old 07-01-2017, 06:07 PM
Brd.Prey Brd.Prey is offline
Junior Member
 
Join Date: Dec 2016
Location: United States
Posts: 7
Default Oser Gauge Pod install

I used the OSER gauge pod but without cutting down the original vent and shorting it I would have had the A/C blowing around inside the dash. This would have made those other 2 center ducts not work very well at all. Since I live in Florida that wasn't an option. So I basically sawed the original vent stack shorter by the distance of the OSIR pod insert. Then I siliconed it all together. I drilled a hole in the side to let the wire into the vent.




Reply With Quote
  #5  
Old 08-01-2017, 03:23 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,590
Default Re: 2009 Audi TTS IE intake manifold install thread

VERY NICE!
__________________
Richard L
aquamist technical support
Reply With Quote
  #6  
Old 16-01-2017, 07:30 PM
Brd.Prey Brd.Prey is offline
Junior Member
 
Join Date: Dec 2016
Location: United States
Posts: 7
Default Re: 2009 Audi TTS IE intake manifold install thread

Finished the install











Reply With Quote
  #7  
Old 04-03-2017, 08:09 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,590
Default Re: 2009 Audi TTS IE intake manifold install thread

Got any running results?
__________________
Richard L
aquamist technical support
Reply With Quote
  #8  
Old 04-06-2017, 05:01 PM
Brd.Prey Brd.Prey is offline
Junior Member
 
Join Date: Dec 2016
Location: United States
Posts: 7
Default Re: 2009 Audi TTS IE intake manifold install thread

Yea, tuner got close to 20 degrees more of timing and it stops me from running out of fuel on my stock S3 injectors. Car runs like a raped ape so much I am moving up to a 6771 EFR twin scroll. I am running 50/50 by weight.
Reply With Quote
  #9  
Old 05-06-2017, 01:41 PM
theboostshack theboostshack is offline
Junior Member
 
Join Date: Mar 2017
Location: Sydney
Posts: 9
Default Re: 2009 Audi TTS IE intake manifold install thread

"Raped ape"! Brilliant. This is how I will describe the performance benefits of Aquamist from now on, if you don't mind Richard. Thank you Brd Prey and nice job on the install.
Reply With Quote
  #10  
Old 17-06-2017, 07:40 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,590
Default Re: 2009 Audi TTS IE intake manifold install thread

Beautiful installation...

I have one question, the charge pipe jet is deep enough so the spray is not impeded by the depth of the thread hole.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:01 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.