waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and resources > Aquamist HFS-6 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 11-09-2017, 09:37 PM
jmlegacy jmlegacy is offline
Junior Member
 
Join Date: Mar 2015
Location: Jamaica
Posts: 12
Default What are the FAV failure symptoms?

Hello,

This post is in relation to a custom system that uses the FAV.


Does anyone know in what way does the FAV usually fails?

I'm having a problem where my FAV or system seems to be putting in far more liquid than usual. Usually start spraying at 40% duty cycle, now.

I had to take the FAV apart the other day to clean some debris that had it stuck open. I'm wondering if the spring tension changed or anything like that if that could be a cause?

<assuming it's the FAV and not the controller, which is currently being looked at as well>
Reply With Quote
  #2  
Old 15-09-2017, 09:00 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,590
Default Re: What are the FAV failure symptoms?

You cannot take the FAV apart and put is back together and expect the valve to work the same. The lift of the piston is critical to the linearity if the valve.

You need to order a new FAV tee. You have ruin the valve for good.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:03 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.