waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

Reply
 
Thread Tools Display Modes
  #21  
Old 27-07-2017, 06:40 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Want to install custom meth plate

No, 15A is the max.
__________________
Richard L
aquamist technical support
Reply With Quote
  #22  
Old 04-08-2017, 03:11 AM
Jroyalty7 Jroyalty7 is offline
Member
 
Join Date: Jul 2017
Location: New York
Posts: 35
Default Re: Want to install custom meth plate

Hey Richard,
Still waiting on various pieces to my set up before install but was wondering if it is still.necessary/recommended to run a solenoid with the DP injection checkvalves? If so any you recommend? TIA
Reply With Quote
  #23  
Old 06-08-2017, 01:57 AM
Jroyalty7 Jroyalty7 is offline
Member
 
Join Date: Jul 2017
Location: New York
Posts: 35
Default Re: Want to install custom meth plate

https://flic.kr/p/Xs2B1P
Hey Richard,
Working on the install/wiring and had some questions...of course lol... So for the gray wiring harness only a few of the wires are used in the wiring diagram you posted for me. Am I to assume that the other wires just get tucked away then? No use for them?
Reply With Quote
  #24  
Old 06-08-2017, 02:00 AM
Jroyalty7 Jroyalty7 is offline
Member
 
Join Date: Jul 2017
Location: New York
Posts: 35
Default Re: Want to install custom meth plate

Also the wiring diagram states to tap into pin 59 which is labeled ylw/violet however in my ecu pin 59 is green/yellow amd pin 60 is ylw/violet... do I stay with pin 59 or the color described?? See pic below


https://flic.kr/p/Xo5gtm
Reply With Quote
  #25  
Old 06-08-2017, 07:53 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Want to install custom meth plate

Which model year is your car? The pin-out is identical but wire colours are different. 2010/2011 is the change-over period.
__________________
Richard L
aquamist technical support
Reply With Quote
  #26  
Old 06-08-2017, 11:34 PM
Jroyalty7 Jroyalty7 is offline
Member
 
Join Date: Jul 2017
Location: New York
Posts: 35
Default Re: Want to install custom meth plate

Hey, ended up getting a wiring diagram from Erwin, pin 59 was correct just a different color in my box. Getting closer to a test run just need to finish running lines to the tank and engine bay. And just to confirm the other wires not listed on the diagram are unused in my application correct? There's no way to hook up a failsafe for the supercharged 3.0 correct? 2013 audi s4 b8.5 is ny car. Thank you again for your help
Reply With Quote
  #27  
Old 07-08-2017, 06:21 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Want to install custom meth plate

You don't have to use every wire on the grey harness. Not sure why your box uses a different wire. Perhaps Audi ran out that colour on that day.
__________________
Richard L
aquamist technical support
Reply With Quote
  #28  
Old 07-08-2017, 07:44 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Want to install custom meth plate

Quote:
Originally Posted by Jroyalty7 View Post
Also the wiring diagram states to tap into pin 59 which is labeled ylw/violet however in my ecu pin 59 is green/yellow amd pin 60 is ylw/violet... do I stay with pin 59 or the color described?? See pic below


https://flic.kr/p/Xo5gtm

The wiring colour is different between the A8 and A4 model even the engine code is the same. Here is the collect diagram. You did not mention the S4 when I asked, just gave me the engine code of CGXC.

__________________
Richard L
aquamist technical support
Reply With Quote
  #29  
Old 10-08-2017, 02:34 AM
Jroyalty7 Jroyalty7 is offline
Member
 
Join Date: Jul 2017
Location: New York
Posts: 35
Default Re: Want to install custom meth plate

Richard is there a way to confirm that pin 3 on the t94 ecu harness is 12v crank power? I did the quick start test today and have no power to the gauge? I did not have time to go back and test with multimeter yet. I will test connection to the battery and eventually the connection with pin 3 but just want to get some thoughts for troubleshooting ahead of time. Probably won't get back at it till this weekend infortunately. Only reference I can find in the wiring diagrams for cgx engines is attached. Tia

https://flic.kr/p/WkwwAr
Reply With Quote
  #30  
Old 10-08-2017, 07:53 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Want to install custom meth plate

you must measure this yourself. Cannot do it for you.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:45 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.