waterinjection.info  

Go Back   waterinjection.info > Water/Methanol database on specific model of cars > Your one-stop search for water/methanol injected cars

Reply
 
Thread Tools Display Modes
  #1  
Old 05-03-2006, 05:32 PM
subarusmasher subarusmasher is offline
Junior Member
 
Join Date: Nov 2005
Location: High Wycombe
Posts: 8
Default Wiring 2d to fuel injector signal on Subaru Impreza WRX

I'm about to install a 2d system to my Subaru Impreza my00 WRX, but am slightly confused about which way round the red and green wires from the FIA2 unit should be piggybacked to one of the fuel injectors.

Here's a link to a .pdf containing the correct wiring diagram for my car (wiring diagram at the end of the document) - If anyone could have a look and tell me which ecu pins i should be connecting the FIA2 to, it would be greatly appreciated

http://www.mrtrally.com.au/performance/docs/WRX-V5.pdf

Many thanks

Richard
Reply With Quote
  #2  
Old 09-03-2006, 08:06 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default

The RED wire goes to static line of the fuel injector and the GREEN goes to the "pulsed" line.

The green wire can go to any one of the following:
a31, a32, a25 or a18.


You can also wire the red wire to a ignition key switched 12V, unless your controller is a "peak and hold" type.

Richard L
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:51 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.