waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 01-02-2014, 12:01 PM
sniper sniper is offline
Junior Member
 
Join Date: Feb 2014
Location: Estonja
Posts: 19
Default Datalogging HFS3v3

Hello forum.
I have a question regarding HFS-3
How can i get data log of 0 to 5 Volt?

FIA2 Aquamist has a purple wire with voltage signal 0-100%


Second question:
Can i get 30 pin scheme (each pin purpose)
Are there any useful pins for data logging and data graph (i marked these pins with green on the photo)?

Thanks
Reply With Quote
  #2  
Old 01-02-2014, 04:49 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Datalogging HFS3v3

Here are some useful pins for data logging:

#5 ........... System start-up: 12V = system on.
#6 ........... Flow sensor signal: 0.5 to 4.5V
#7 ........... Water level sensor: 0v= empty, 5v= not empty
#8 ........... Fuel injector (-). not direct injection.
#16 ......... IDC% signal: 0 to 5V
#17 ......... MPS signal: 0 to 5V (signal conditioned)
#18 ......... IDC% to the water injection valve
#23 ......... System power: 12V (switched/fused)
__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 01-02-2014, 10:15 PM
sniper sniper is offline
Junior Member
 
Join Date: Feb 2014
Location: Estonja
Posts: 19
Default Re: Datalogging HFS3v3

Quote:
Originally Posted by Richard L View Post
Here are some useful pins for data logging:

#5 ........... System start-up: 12V = system on.
#6 ........... Flow sensor signal: 0.5 to 4.5V
#7 ........... Water level sensor: 0v= empty, 5v= not empty
#8 ........... Fuel injector (-). not direct injection.
#16 ......... IDC% signal: 0 to 5V
#17 ......... MPS signal: 0 to 5V (signal conditioned)
#18 ......... IDC% to the water injection valve
#23 ......... System power: 12V (switched/fused)
Thank you very much!
You could describe these pins in manual, so that would bring more customers

Last edited by sniper; 01-02-2014 at 10:18 PM.
Reply With Quote
  #4  
Old 01-02-2014, 10:25 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Datalogging HFS3v3

Those pins are not static-protected so I rather use them as intended for remote diagnostic usage. They exist for the benefit for us and customer without working knowledge of our system but equipped with a simple $10 digital voltmeter.

It has been extremely useful since it was introduced.

For more knowledgeable users, all they need to do is ask here.
__________________
Richard L
aquamist technical support
Reply With Quote
  #5  
Old 04-02-2014, 06:56 AM
sniper sniper is offline
Junior Member
 
Join Date: Feb 2014
Location: Estonja
Posts: 19
Default Re: Datalogging HFS3v3

Richard L at 402 meters there is no time to consider devices.
Everything that happens with the engine we look at dataloge after racing.
Reply With Quote
  #6  
Old 04-02-2014, 01:44 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Datalogging HFS3v3

What car is it? A 10s/quarter one?
__________________
Richard L
aquamist technical support
Reply With Quote
  #7  
Old 04-02-2014, 05:17 PM
sniper sniper is offline
Junior Member
 
Join Date: Feb 2014
Location: Estonja
Posts: 19
Default Re: Datalogging HFS3v3

Yes
http://www.youtube.com/watch?v=Z3FhekxHuXw
I include datalog
Reply With Quote
  #8  
Old 04-02-2014, 06:41 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Datalogging HFS3v3

Wow, very impressive! How much power?

I can seem to see the data datalog. It will be quite interesting.
__________________
Richard L
aquamist technical support
Reply With Quote
  #9  
Old 05-02-2014, 07:57 AM
sniper sniper is offline
Junior Member
 
Join Date: Feb 2014
Location: Estonja
Posts: 19
Default Re: Datalogging HFS3v3

Richard AUXFS control only HFS4?
HFS3 do not have it?

Quote:
Wow, very impressive! How much power?
344 wheel N/A
Quote:
I can seem to see the data datalog.

Last edited by sniper; 05-02-2014 at 03:01 PM.
Reply With Quote
  #10  
Old 09-02-2014, 09:11 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Datalogging HFS3v3

Interesting 11s log. Are you able to log the water flow now?

Only HFS4 has AUXFS.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:37 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.