|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Re: The only indicator still working on the gauge is “water level”. The pump wouldn’t switch on. HFS
Is this an answer for the test?
__________________
Richard L aquamist technical support |
#12
|
|||
|
|||
Re: The only indicator still working on the gauge is “water level”. The pump wouldn’t switch on. HFS
No. I will try today.
|
#13
|
|||
|
|||
Re: The only indicator still working on the gauge is “water level”. The pump wouldn’t switch on. HFS
Unfortunately the pump still does not turn on.
Maybe this video will help? https://yadi.sk/i/cHDzjMmstav78 Last edited by iideaiidea; 24-07-2016 at 10:47 PM. |
#14
|
|||
|
|||
Re: The only indicator still working on the gauge is “water level”. The pump wouldn’t switch on. HFS
The video still shows the gauge is plugged in.
__________________
Richard L aquamist technical support |
#15
|
|||
|
|||
Re: The only indicator still working on the gauge is “water level”. The pump wouldn’t switch on. HFS
I tried to turn the pump on with a “sys” jumper without gauge but it didn't work.
I made a video to demonstrate the work of the "water level" indicator. |
#16
|
|||
|
|||
Re: The only indicator still working on the gauge is “water level”. The pump wouldn’t switch on. HFS
I think it is time for you to send the controller back to me to service. We don't charge. It is after all nearly 6 years old.
__________________
Richard L aquamist technical support |
#17
|
|||
|
|||
Re: The only indicator still working on the gauge is “water level”. The pump wouldn’t switch on. HFS
Ok. Where should i send the controller?
|
#18
|
|||
|
|||
Re: The only indicator still working on the gauge is “water level”. The pump wouldn’t switch on. HFS
Please write: "return to manufacturer for repair"
Declared value £10.00 ERL Ltd Iroko house Bolney Ave Peacehaven East Sussex BN10 8HF England T: +44 1273 581007 F: +44 1273 581555
__________________
Richard L aquamist technical support |
#19
|
|||
|
|||
Re: The only indicator still working on the gauge is “water level”. The pump wouldn’t switch on. HFS
Can you please specify the information? Addressee, address, postcode etc
We need this to avoid problems this postal services. Thanks. |
#20
|
|||
|
|||
Re: The only indicator still working on the gauge is “water level”. The pump wouldn’t switch on. HFS
I sent the controller to you by post.
|
Thread Tools | |
Display Modes | |
|
|