waterinjection.info  

Go Back   waterinjection.info > Other > Gallery - NEW

Reply
 
Thread Tools Display Modes
  #1  
Old 16-05-2005, 09:01 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Volvo - Gerald's 1s install by Gan Motorsport, Singapore

Have some good pictures of the Volvo install by Mr Gan of Gan Motorsport Singapore. Gerald (owner) kindly send us the pictures.

I will try to get some more pictures of the car and engine bay in general.

A few words from Gerald:
These are the pictures of my installation, done by Gan Motorsports
my car is a Volvo S60T5 MY2001
have mounted the high pressure pump behind the front left side the bumper
(my car is a RHD), drawing water from the windshield wiper tank.. the
pressure switch is mounted for easy adjustability
and the nozzle is actually drilled into the plastic intake air tube, bet
the temp sensor and the boost sensor; mounted with a small metal plate
secured with rivets and epoxy bonding












__________________
Richard L
aquamist technical support
Reply With Quote
  #2  
Old 17-05-2005, 07:28 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default

I have just receive a few more interesting plots during the dyno session:

the graphs were recorded during a dyno run;
ambient temp was 32 degrees C, humidity 85%



See the inlet air temperature drop when water cuts in...


The ECU is able to alter ignition timing in present of WI...


More installation inofrmation, nice illrustrated images...


__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 18-05-2005, 10:02 AM
Gert_ Gert_ is offline
Junior Member
 
Join Date: Mar 2005
Location: The Netherlands
Posts: 20
Default

Did he sent an diagram without the water injection activated? Would be nice to see. Where are those temps recorded, after throttle, or ...?
What turbo pressure?

Gert
Reply With Quote
  #4  
Old 19-05-2005, 04:05 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default

I did ask the same question but I was told that the car wad mapped with water injection he will not risk running the engine without water injection.

Nor sure wherethe temperature sensor was placed. Data was recorded with ODB2.
__________________
Richard L
aquamist technical support
Reply With Quote
  #5  
Old 19-05-2005, 04:34 PM
Gert_ Gert_ is offline
Junior Member
 
Join Date: Mar 2005
Location: The Netherlands
Posts: 20
Default

Geez, that is something.... timing from 5? to ? 23? :shock: :shock: :shock:

Too bad we do not know the boost levels at what rpm....

Gert
Reply With Quote
  #6  
Old 28-06-2008, 04:32 PM
volvoman volvoman is offline
Junior Member
 
Join Date: Jun 2008
Posts: 1
Default

Hi all i am new here :lol: i cannot see the pics of this volvo

Russ
Reply With Quote
  #7  
Old 01-07-2008, 03:25 PM
Dust Dust is offline
Senior Member
 
Join Date: Mar 2007
Location: Frankfort, Kentucky
Posts: 227
Default

me neither.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:33 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.