waterinjection.info  

Go Back   waterinjection.info > Water/Methanol database on specific model of cars > Your one-stop search for water/methanol injected cars

Reply
 
Thread Tools Display Modes
  #1  
Old 09-05-2018, 05:45 PM
pintovit pintovit is offline
Junior Member
 
Join Date: Nov 2012
Location: Portugal
Posts: 2
Default Setup for a 300zx with DP

Hi,

I'm building my shopping list to implement DP WI on my 300zx TT V6.

I'll be controlling the injection with my standalone and I'll be building my own tank.

Everything else, I need to get... So I made this list and I was hopping someone could point out if its correct, if I'm missing something or it contains something I don't need:
---- 806-400 ---- Direct port with 0.4mm 6x110cc jets - Std compression fitting
---- 806-239B ---- 1300cc Fast Acting Valve Fittings: 4mm+4mm
---- 806-249 ---- 4mm 15psi Checkvalve
---- 806-258 ---- In-tank filter
---- 806-259 ---- Hi-pressure inline 130um filter male/female 1/8BSP for HFS's (806-259)
---- 806-263 ---- 6 meters 4mm PTFE hose
--- 806-555 --- Replacement Flow sensor assembly Std (806-555)
---- 806-567 ---- Replacement Hall-effect Flow sensor cable
---- 806-581 ---- Replacement water level sensor
---- 806-582 ---- Replacement 160psi water pump

The basic idea is to have the pump turned on by the ECU (through a relay) when the system is active and then control the FAV using a custom table on the Link G4+

Thanks a lot for your time guys!

Last edited by pintovit; 09-05-2018 at 05:48 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:43 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.