waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and resources > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #11  
Old 11-06-2018, 09:38 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,796
Default Re: Water Level light

This is good news. I like you to examine the wiring underneath the relay as well as the relay contacts.
__________________
Richard L
aquamist technical support
Reply With Quote
  #12  
Old 13-06-2018, 02:06 AM
tezlum tezlum is offline
Junior Member
 
Join Date: Jan 2018
Location: Canada
Posts: 26
Default Re: Water Level light

I got the pump all reassembled and purged the lines pre fav then purged the jets with a normal spray pattern. But I noticed the water light stayed on when the sys jumper was on and with or without the fav jumper. The light turns off when the system is not injecting but on as soon as it stops injecting it waits for the failsafe reset then goes off
Attached Images
File Type: jpg IMG_20180612_104247-562x1000.jpg (181.9 KB, 3 views)
File Type: jpg IMG_20180612_104243-562x1000.jpg (76.2 KB, 3 views)
File Type: jpg IMG_20180612_104256-562x1000.jpg (88.4 KB, 3 views)
File Type: jpg IMG_20180612_104309-562x1000.jpg (76.7 KB, 3 views)
File Type: jpg IMG_20180612_104320-1000x562.jpg (81.7 KB, 3 views)
Reply With Quote
  #13  
Old 13-06-2018, 03:55 PM
tezlum tezlum is offline
Junior Member
 
Join Date: Jan 2018
Location: Canada
Posts: 26
Default Re: Water Level light

I noticed now when hitting bumps or turning quickly without the thereshold being activated I occasionally get the water level light blink or stay on for a moment
Reply With Quote
  #14  
Old 25-06-2018, 03:58 PM
tezlum tezlum is offline
Junior Member
 
Join Date: Jan 2018
Location: Canada
Posts: 26
Default Re: Water Level light

I have tried testing all the contacts and wires for shorts and switching relays and fuses but still every time it injects even when in sys mode with the jets out still activates the water level light only and failsafe activated
Reply With Quote
  #15  
Old 25-06-2018, 09:21 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,796
Default Re: Water Level light

lets go back a bit.

What is the serial number of the controller?

I don't recognise this part what is it?
__________________
Richard L
aquamist technical support
Reply With Quote
  #16  
Old 25-06-2018, 09:39 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,796
Default Re: Water Level light

more questions:

1. What car is it?
2. What is the HP
3. What is the size of your fuel injector
__________________
Richard L
aquamist technical support
Reply With Quote
  #17  
Old 25-06-2018, 09:40 PM
tezlum tezlum is offline
Junior Member
 
Join Date: Jan 2018
Location: Canada
Posts: 26
Default Re: Water Level light

Quote:
Originally Posted by Richard L View Post
lets go back a bit.

What is the serial number of the controller?

I don't recognise this part what is it?
That part is the relay plug for the pump harness with die electric grese but that has been cleaned off now as I thought it might be an issue. I believe the controller is the v3.0
Attached Images
File Type: jpg IMG_20180625_133758-562x1000.jpg (152.8 KB, 3 views)
Reply With Quote
  #18  
Old 25-06-2018, 09:42 PM
tezlum tezlum is offline
Junior Member
 
Join Date: Jan 2018
Location: Canada
Posts: 26
Default Re: Water Level light

Quote:
Originally Posted by Richard L View Post
more questions:

1. What car is it?
2. What is the HP
3. What is the size of your fuel injector
2009 WRX
300 Wheel HP
1000cc/min

I do have the gain at -25% and 1.5x scaler soldered on the back and 1.0 link cut
Reply With Quote
  #19  
Old 25-06-2018, 09:47 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,796
Default Re: Water Level light

The system was made in August 2014, you waited 4 years to have it installed?

It is strange, you have done all the right things.
__________________
Richard L
aquamist technical support
Reply With Quote
  #20  
Old 25-06-2018, 09:52 PM
tezlum tezlum is offline
Junior Member
 
Join Date: Jan 2018
Location: Canada
Posts: 26
Default Re: Water Level light

Quote:
Originally Posted by Richard L View Post
The system was made in August 2014, you waited 4 years to have it installed?

I think the problem is caused by mis-matching of the HP vs injector size.
I had bought it "new" last year from someone that had never installed or unpackaged anything from the kit. Would you recomend going to a single jet?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 07:14 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.