waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Diesel

Reply
 
Thread Tools Display Modes
  #1  
Old 13-06-2005, 11:07 AM
Will_emt Will_emt is offline
Junior Member
 
Join Date: Mar 2005
Posts: 7
Default VAG PD Motors; WI experience

My profuse apologies if I am recreating an existing post.
I tune quite a few PD motors in VW Polo TDi, Audi A4 iterations. Generally these are the PD100/PD130 motors. They go extremely well, but we keep running into heatsoak issues. The turbo is standard VNT15, and layout is single side mount intercoolers.

Has anyone worked with Aquamist on these? Could use some advise on the following;
1.) optimal jet locations.
2.) Which system is best suited to the application (would a 2D do the trick).
3.) With respect to 2 above, what jet sizes are best and at which boost level should it be triggered.

Sans methanol addition (most of these are daily runarounds), how much benefit will WI be for pure water, and are there any dangers associated with WI that might not be present in petrol applications, bearing in mind that CR is higher to begin with, without WI?
Advise will be most appreciated!
Cheers
W
Reply With Quote
  #2  
Old 05-03-2006, 09:31 PM
Fish Fish is offline
Junior Member
 
Join Date: Aug 2004
Posts: 14
Default

Just found this and could be tempted to fit my spare 1s system and see what results I get. I have a Seat Leon 130 TDi.

Fish
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:56 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.