waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Gasoline Forced-Induction

Reply
 
Thread Tools Display Modes
  #1  
Old 01-11-2016, 10:37 PM
travelall74 travelall74 is offline
Junior Member
 
Join Date: Oct 2016
Location: United States
Posts: 1
Default nozzle location

first time posting, brand new to the forum , i have been searching the forum for the answer and i haven't found it . i am working on a 2013 audi r6 v8 tfsi and wanted to know where i should put the injector nozzles? its a twin turbo setup i just am not sure where to put them . i have the system plumbed to the engine and wiring ran just need to figure this part out , thanks in advance rob
Reply With Quote
  #2  
Old 02-11-2016, 02:45 PM
rotrex rotrex is offline
Senior Member
 
Join Date: Jan 2014
Location: Germany
Posts: 187
Default Re: nozzle location

I'd go direct port and place the nozzle close to the fuel injector, ideally right in front of them. Direct port works best if the spray does not have to take any turns. Always fit the nozzle on the same side as the injectors, otherwise most of the spray will only wet a part of the cylinder volume.

If you don't go direct port, things get more complicated. I'd propose you post pictures of the engine bay so we can see the inlet geometry.
Reply With Quote
  #3  
Old 01-12-2016, 12:55 PM
kayleedave kayleedave is offline
Junior Member
 
Join Date: Dec 2016
Location: United Kingdom
Posts: 1
Default Re: nozzle location

Where is it?

________________________________________ ___________________________
Dissertation Proposal
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 09:38 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.