#21
|
|||
|
|||
Re: 997TT issues?
I pulled both jets out of the charge pipe, when I jump the "SYS" the gauge lit half the bars. But when I went to look at the spray pattern, the water shot out far and in a straight line like a super soaker. There was no cone pattern just a high pressure stream.
|
#22
|
|||
|
|||
Re: 997TT issues?
Thanks for the update...
I suspect the jet with a straight spray does not have an internal spinner or it is not screw down properly. Check the internal. Has the jet been serviced since the installation? During this test, what is the "SC" set to? Until this problem jet is working as designed, we cannot set the bargraph of the gauge properely. The system appears to be work as it should besides the jets.
__________________
Richard L aquamist technical support |
|
|