waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum > HFS-4 user manual and wiring diagrams

Reply
 
Thread Tools Display Modes
  #11  
Old 28-04-2012, 08:27 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 6 (update) SN #12091 onwards

You can certainly run HFS-2 on your car, injection is based on IDC only or 70% IDC/30% manifold pressure.

You need a 1/8NPT tap and a few drop of loctite for the nozzle adaptor.
__________________
Richard L
aquamist technical support
Reply With Quote
  #12  
Old 29-04-2012, 01:36 AM
silversport silversport is offline
Junior Member
 
Join Date: Apr 2012
Location: Texas
Posts: 4
Default Re: Mazdaspeed 6 (update) SN #12091 onwards

OK,
What will be the best way to order; if I can get a link for best results.

Thanks,
Richard
Reply With Quote
  #13  
Old 29-04-2012, 08:52 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 6 (update) SN #12091 onwards

Please check your pm.

Richard
__________________
Richard L
aquamist technical support
Reply With Quote
  #14  
Old 13-05-2012, 12:31 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 6 (update) SN #12091 onwards

Yes, you can. Make sure it is a HFS2-v2. Ity can be upgraded later.
__________________
Richard L
aquamist technical support
Reply With Quote
  #15  
Old 13-05-2012, 12:33 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 6 (update) SN #12091 onwards

The v2 wiring diagram has been updated to v3.

13th May 2012
__________________
Richard L
aquamist technical support
Reply With Quote
  #16  
Old 08-07-2012, 03:50 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 6 (update) SN #12091 onwards

The v3 wiring diagram has been updated to v4.

8th July 2012
__________________
Richard L
aquamist technical support
Reply With Quote
  #17  
Old 30-05-2013, 08:43 PM
Presss Presss is offline
Junior Member
 
Join Date: Apr 2013
Location: Ukraine
Posts: 8
Default Re: Mazdaspeed 6 (update: 8th July 2012 ) SN #12091 onwards

Hi Richard,
I recently bought HFS4. Electric men installed me as WIRING DIAGRAM MS6 v4. And then my boost stay lower than it was. And I understood that my boost control brains of HFS4. Set jets which was included 0.7 mm.
when we are working on 100% IDC + gain MAX then red LED turns around 4000 rpm. and the boost is reduced to 0.8 bar
it means that jets too small for my configuration.

but when I turn on the 100% boost then red LED does not light up. But still, my car is going slower than before the installation HFS4. HFS4 brains cut off boost by themselves .
WHY???

tell me which way to IDC, or boost? I bought this WMI HFS due just this working by IDC.

power of the car before installation was 320 hp now its about 270-300hp.

my modes:
FMIC, CAI, full exhaust 3'' + versatuner

I plan to get 350 hp

thanks
Reply With Quote
  #18  
Old 30-05-2013, 08:50 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 6 (update: 8th July 2012 ) SN #12091 onwards

What water/methanol mix are you running?
__________________
Richard L
aquamist technical support
Reply With Quote
  #19  
Old 03-06-2013, 10:41 AM
Presss Presss is offline
Junior Member
 
Join Date: Apr 2013
Location: Ukraine
Posts: 8
Default Re: Mazdaspeed 6 (update: 8th July 2012 ) SN #12091 onwards

Quote:
Originally Posted by Richard L View Post
What water/methanol mix are you running?
water meth 50/50
Reply With Quote
  #20  
Old 09-06-2013, 01:21 PM
Presss Presss is offline
Junior Member
 
Join Date: Apr 2013
Location: Ukraine
Posts: 8
Default Re: Mazdaspeed 6 (update: 8th July 2012 ) SN #12091 onwards

Quote:
Originally Posted by Richard L View Post
What water/methanol mix are you running?
Hi Richard do you remember my questions?
please... i need your help

Last edited by Presss; 09-06-2013 at 02:49 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:25 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.