waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Intercooler Effects

Reply
 
Thread Tools Display Modes
  #1  
Old 02-11-2003, 06:42 AM
Wankel7 Wankel7 is offline
Junior Member
 
Join Date: Nov 2003
Location: Laredo, TX
Posts: 5
Default Intake temp gauge

I recently bought that Omori intake temp gauge off of ebay. To measure the effects of the water injection setup. Seems like a nice gague and it is analog.

However, I found anouther gauge. It is made by Davtron. Basicly, it is two probes and a display. The display does not show the two temps individually. However, it does have a neat setting. It shows a differential. So it subtracts Inlet from Outlet. Also, this gauge is FAA approved for use in aircraft! Cost only about 175. The display is digatal.

The best thing I have found was that autometer deal. Considering the cost of the Autometer gauge.

I have not gotten the gauge. But I will at some point. I will put up some info on it.

Just do a search for Davtron if you want their phone number. They do not have anything abotu this on their webpage.

James
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:22 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.