|
|
#21
20-06-2012, 05:27 PM
|
|||
|
|||
Re: HELP! HFS-3 wont work!
Are talking about the same thing?
The flow sensor consists of two parts 1 The nickel plated brass tube with a turbine wheel inside 2. A plastic clip with a magnetic sensor that picks up the speed of the turbine wheel. There are two versions... Both can be cleaned but different procedure. So tell me which version you have so I can supply with with the correct information for disassembling it.
__________________
Richard L aquamist technical support 
|
|
#22
20-06-2012, 08:34 PM
|
|||
|
|||
|
Re: HELP! HFS-3 wont work!
Quote:
|
|
#23
20-06-2012, 10:42 PM
|
|||
|
|||
|
Re: HELP! HFS-3 wont work!
Is there any reason you are not answering my question, twice. I wouldn't like to you disassemble the flow sensor without any instruction in case you may damage it further.
If you want to go on your own way, you do not need to post here are any help. I am wasting my time and your time.
__________________
Richard L aquamist technical support
|
|
#24
20-06-2012, 10:52 PM
|
|||
|
|||
|
Re: HELP! HFS-3 wont work!
Quote:
Come on, our professional mechanic did this job without any trouble. we have found a reason why the system didnt work. You helped us with this. thanks again.
|
|
#25
21-06-2012, 12:22 AM
|
|||
|
|||
|
Re: HELP! HFS-3 wont work!
Well I am glad you have cleared the debris off the sensor and made it work again. So the system is up and running again?
__________________
Richard L aquamist technical support
|
|
#26
21-06-2012, 07:31 AM
|
|||
|
|||
|
Re: HELP! HFS-3 wont work!
Quote:
|
 |
|
|
Linear Mode
