waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Gasoline Forced-Induction

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-06-2018, 10:47 PM
SAMzG35 SAMzG35 is offline
Junior Member
 
Join Date: Nov 2014
Location: Canada
Posts: 15
Default Nozzle size

Hi!
Long time lurker, first time posting. I bought a brand new HFS-6 over 6 years ago and never installed it. My build took a different direction lately and I think its time to put this kit to use.

I'm kinda lost on the nozzle size and location. Before I drill and start making holes I wanna make sure I got this right.

A little bit about my car, 2004 G35 coupe twin turbo with Brian Crower 4.2L Stroker.
I have ID2000 injectors and I'm planning to run 20-24psi.
Piping goes as follow Turbo>Intercooler>BOV>MAF>Throttle body.


Can someone please let me know if I got this correctly if I'm planning to run a 50:50 meth/water with 15% to fuel?
2000cc x 6=12000
12000 x 0.15=1800cc
160psi - 20~24=140~136psi.
The manual shows the 1.00mm flows at 550cc at 140psi

Now this is the part where I'm confused.
If I got the above numbers correct, does that mean I need 3x1.00mm nozzles at a total of 1650cc (closest i can get to 1800cc)?

If I do need 3, where do they go? After the MAF before Throttle body?

Much appreciated.

Last edited by SAMzG35; 06-06-2018 at 02:15 AM.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 09:57 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.