#1
|
|||
|
|||
How can tech me use hfs4-v2
I use HFS-4V2 I use MAP3,1.0 jet,0.7 restrictor working now,I 1min I get 375cc on sys
But I want get 1min 500cc ,How can I do it? SC 70% please teach me Thanks |
#2
|
|||
|
|||
Re: How can tech me use hfs4-v2
Remove the restrictor and re-test. Let me know the result. Also set the PI-R to Fully clockwise.
Richard
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Re: How can tech me use hfs4-v2
Quote:
But get 350cc on sc 70% I use Aquamist Check Valve Jet! I try other, have not Check Valve Jet, I can get 400CC So ~ How can I do? Last edited by Racing Station; 13-11-2014 at 05:17 AM. |
#4
|
|||
|
|||
Re: How can tech me use hfs4-v2
You can also increase the pump pressure (1/16" allen screw at front end of the pump head) to 180-190psi. (about 1/2 turn clockwise).
__________________
Richard L aquamist technical support |
#5
|
|||
|
|||
Re: How can tech me use hfs4-v2
Quote:
Use You said method? If 1.0 Check Valve Jet on 180-190psi pump I can get how much cc? Thanks |
#6
|
|||
|
|||
Re: How can tech me use hfs4-v2
I would check the flow curve on the user manual. Take 15psi off for CVJ.
So.. what is the flow rate of the 1mm jet without the restrictor?
__________________
Richard L aquamist technical support |
#7
|
|||
|
|||
Re: How can tech me use hfs4-v2
I don't use restrictor
|
#8
|
|||
|
|||
Re: How can tech me use hfs4-v2
Now or before? I read your first post on a 0.7mm restrictor.
__________________
Richard L aquamist technical support |
#9
|
|||
|
|||
Re: How can tech me use hfs4-v2
Before use 0.7 restrctor!
Now have no't use! |
#10
|
|||
|
|||
Re: How can tech me use hfs4-v2
OK. Thank you. Very clear now.
__________________
Richard L aquamist technical support |
|
|