waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-6 forum

Reply
 
Thread Tools Display Modes
  #11  
Old 16-07-2014, 07:45 PM
vsgts14 vsgts14 is offline
Junior Member
 
Join Date: Jun 2014
Location: Phillipsburg, NJ
Posts: 15
Default Re: hfs6 problems

rich, it worked! thanks, i grounded that wire coming from the solenoid (it was black), directly to the chassis.

thanks for the help!!! i was not looking forward to buying a new kit.
Reply With Quote
  #12  
Old 17-07-2014, 12:13 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: hfs6 problems

Next, pick out the brown wire from the in-coming 8-core cable, cut it from the circuit board. Now connect it to the black wire from the coil (already disconnected from the circuit board)

Let me know.
__________________
Richard L
aquamist technical support
Reply With Quote
  #13  
Old 23-07-2014, 03:49 PM
vsgts14 vsgts14 is offline
Junior Member
 
Join Date: Jun 2014
Location: Phillipsburg, NJ
Posts: 15
Default Re: hfs6 problems

ok, so the brown wire will basically be crimped with the new wire i made? (brown and black from coil connected to one new ground wire).
Reply With Quote
  #14  
Old 05-08-2014, 03:32 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: hfs6 problems

The black ground wire of the FCM is unrelated.

post a picture before I get confused. Mark the wires in question with numbers.
__________________
Richard L
aquamist technical support
Reply With Quote
  #15  
Old 26-08-2014, 06:27 PM
vsgts14 vsgts14 is offline
Junior Member
 
Join Date: Jun 2014
Location: Phillipsburg, NJ
Posts: 15
Default Re: hfs6 problems

here is what I got.
Attached Images
File Type: jpg IMG_1517.jpg (186.7 KB, 10 views)
Reply With Quote
  #16  
Old 26-08-2014, 08:21 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: hfs6 problems

Looking at the picture, are you connecting the black wire of the coil permanently to ground?
__________________
Richard L
aquamist technical support
Reply With Quote
  #17  
Old 26-08-2014, 08:48 PM
vsgts14 vsgts14 is offline
Junior Member
 
Join Date: Jun 2014
Location: Phillipsburg, NJ
Posts: 15
Default Re: hfs6 problems

correct. the small black wire coming off the coil is butt connected to a new wire and then grounded to the chassis. is this alright?

I cut the brown wire and left it until further instruction.
Reply With Quote
  #18  
Old 26-08-2014, 09:21 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: hfs6 problems

No, you will burn the coil.

Disconect the black wire from ground and connect the end to the short brown wire. from the incoming harness.
__________________
Richard L
aquamist technical support
Reply With Quote
  #19  
Old 27-08-2014, 04:22 AM
vsgts14 vsgts14 is offline
Junior Member
 
Join Date: Jun 2014
Location: Phillipsburg, NJ
Posts: 15
Default Re: hfs6 problems

okie dokie, and that's all i need to do? brown wire from the main harness connected to black wire coming from the coil? and leave the other two ends blank
Reply With Quote
  #20  
Old 27-08-2014, 06:54 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: hfs6 problems

OK, here is an illustration:

__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 11:24 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.