#1
|
|||
|
|||
HFS flow led blinking
Just installed the HFS-4 on my 997 Turbo. Just a quick question regarding the gauge.
When I come to set LED on the SC potentiometer to display 5-6 bars the last bar always blinks. No matter how slow I move the SC. If I go all the way to full flow it is fine meaning all 8 bars light up but if in between it will blink no matter what I do. Love the quality of this kit and can't wait to tune it |
#2
|
|||
|
|||
Re: HFS flow led blinking
Check the routing of the sensor harness, there may be some induced signal from neighbouring cable, superimposing onto the sensor cable.
Send a picture of the FAV and jet installation. It could be too far.
__________________
Richard L aquamist technical support |
|
|