#1
|
|||
|
|||
Need Help right NOW ! ! Please..249.585 mph !!
John Noonan here, I have an Aquamist water injection kit for my Turbo Suzuki Hayabusa Suzuki Streetbike. The problem I have is I am now running a Water injection kit rather than an innercooler and I am having a problem with the wiring info..( nothing came with the kit I have)
I have a hobbs switch for the kit, I am trying to figure out how to wire the Hobbs switch to the in-line valve and to power? ? Please post here and also to my email ( quickturbo@aol.com I am leaving to Land Speed race at El Mirage dry lake bed in Calif in a few hours ..I have been 232.311 MPH in the dirt and 249.585 MPH at Bonneville last year.. Please help if you can Thanks John |
#2
|
|||
|
|||
Two possibilities, in general since I am not sure who sold you the system and the parts involved.
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Thanks, you have an email...
|
#4
|
|||
|
|||
Richard thanks for the assistance, it was worth the $75.00 phone call .
Thanks again. PS. the fuel pump fuse blew a little more than half way down at 197 mph (2 miles an hour faster than the current record :evil: ) we go out again in aweek or so..I will post results. Thanks again. :wink: John |
#5
|
|||
|
|||
John,
It must be frightening when the engine stops at 197mph! Good luck for the next run. I mentioned your recorrd attempt to "jack Frost", he wishes you luck.
__________________
Richard L aquamist technical support |
#6
|
|||
|
|||
10-10-987 is the best way to call Richard, trust me.
|
#7
|
|||
|
|||
Richard Jack is the Man to beat in England, I was going to meet up at a Judgement day at Elvington? Finances were not right..
J |
#8
|
|||
|
|||
If this can be arranged, it will be the race of giant killers. I will be there for sure.
I am sure once you have achieved 250mph+ over there, jack will be stirred.
__________________
Richard L aquamist technical support |
|
|