waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum > HFS-4 user manual and wiring diagrams

Reply
 
Thread Tools Display Modes
  #21  
Old 03-05-2015, 06:09 PM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

Hey Richard having troubles setting up my failsafe, seems to be spraying with next to no load, my sc is set at 6 bars I think wh is set properly but can't figure out how to set WL proper, how might I delay spray
Reply With Quote
  #22  
Old 03-05-2015, 06:15 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 3

Quote:
Originally Posted by jdraps13 View Post
Hey Richard having troubles setting up my failsafe, seems to be spraying with next to no load, my sc is set at 6 bars I think wh is set properly but can't figure out how to set WL proper, how might I delay spray
What is the position of the "THRES" on the controller?
__________________
Richard L
aquamist technical support
Reply With Quote
  #23  
Old 03-05-2015, 06:25 PM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

I followed the instructions and aet fully counter clockwise still
Reply With Quote
  #24  
Old 03-05-2015, 07:07 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 3

Quote:
Originally Posted by jdraps13 View Post
I followed the instructions and aet fully counter clockwise still
Fully counter-clockwise is for testing only. Set it to 10am and see if you can set the WL.
__________________
Richard L
aquamist technical support
Reply With Quote
  #25  
Old 03-05-2015, 09:39 PM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

Ok so it's not spraying with every blimp of the throttle now but, still can't seem to get the lower failsafe to trip maybe my upper is set too high
Reply With Quote
  #26  
Old 04-05-2015, 07:38 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 3

What are the settings for the following:
(face of a clock)

THRES ....... ?
SC .............?
WL ............ ?
WH ..........?

Let me know.
__________________
Richard L
aquamist technical support
Reply With Quote
  #27  
Old 04-05-2015, 12:09 PM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

Thresh 12am
Sc 2am
WL 1am
WH 11am
Reply With Quote
  #28  
Old 04-05-2015, 02:27 PM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

One last thing I was checking out the wiring and I am wondering if I set up 2AA wrong, For the wire that needed to be cut I used one posi lock with brown and 2AA connected to one end and white and 2AA to the other is that correct or should use two posi locks? One for brown and one end of 2AA and the other for white and 2AA so there is no more connection for 2AA, thanks Richard
Reply With Quote
  #29  
Old 05-05-2015, 08:29 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 3

Have you cut the 2AA wire into two halves?
__________________
Richard L
aquamist technical support
Reply With Quote
  #30  
Old 05-05-2015, 01:04 PM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

Yes I sorted that out now use two posi locks instead of just the one lower limit failsafe is still giving me s hard time tho
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:27 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.