HFS-3 & DDS3

pcoe149 · #1 01-01-2012, 04:18 PM

Hi, i have an old system for which i have been using a DDS 3 gauge for and i really like the way it interacts the driver with the car and gives me all the information i could need. i have just bought a HFS-3 system without the gauge and wondered if there is any way of utilising the gauge from the old system with my new water injection, it is the old style dds 3 that has the external junction box and just bare wires coming from the gauge. would this be possible? if so can anyone offer any advice on how to connect the 2 together?

Thanks in advance for any help.

Best regards,

Phil.

Richard L · #2 02-01-2012, 03:16 PM

Phil,

It is possible to rewire the older gauge for the HFS-3. Can you tell me the serial number of the HFS-3 so thst I can be certain. It is on the bottom left hand corner of the controller board.

It may be easier to make the a RJ45 plug to a 8-position screw terminal connector.