waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > General Effects

Reply
 
Thread Tools Display Modes
  #1  
Old 15-05-2014, 12:58 AM
maaxxyy maaxxyy is offline
Junior Member
 
Join Date: May 2014
Location: uk
Posts: 1
Default Nozzle sizes

Hi guys i've just jioned the forum as i'm thinking on building a water/meth kit for my car.
I have a 92 VW Corrado G60, 190-200 bhp, chipped and pulleyed (68mm), running standard injectors (green 280cc) and approximately 1.0 bar of boost.
Can anyone advise me on what size nozzle i would need to run in it? Regards

Last edited by maaxxyy; 15-05-2014 at 01:19 AM.
Reply With Quote
  #2  
Old 31-05-2014, 06:58 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Nozzle sizes

around 200-300cc/min nozzle for M50/W50 is a good start.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 11:03 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.