waterinjection.info  

Go Back   waterinjection.info > Water/Methanol database on specific model of cars > Your one-stop search for water/methanol injected cars

Reply
 
Thread Tools Display Modes
  #1  
Old 25-09-2011, 08:41 AM
Mini KEG Mini KEG is offline
Junior Member
 
Join Date: Sep 2011
Location: Utah
Posts: 6
Question Not Injecting?

I am new to this water injection idea. I recently purchased an 06 R53 with HFS-6 already installed. While driving the Bargraph doesn't change. I completed a manual test and it sprays fine. The Bargraph shows it is spraying during manual test. The "B" is not lighting up while driving so it isn't falling in the fail-safe window. If anyone can help me out that would be much appreaciated.

Thank you

Last edited by Mini KEG; 25-09-2011 at 08:51 AM.
Reply With Quote
  #2  
Old 26-09-2011, 03:16 PM
Howerton Engineering
Guest
 
Posts: n/a
Default Re: Not Injecting?

Is the green f-IDC light inside the controller flashing while the car it running?

Is the THRES pot set low enough for the car to inject while driving?
Reply With Quote
  #3  
Old 26-09-2011, 07:10 PM
Mini KEG Mini KEG is offline
Junior Member
 
Join Date: Sep 2011
Location: Utah
Posts: 6
Default Re: Not Injecting?

Yes the f idc light is flashing while running. the thres position wasn't changed and it was working fine at one point. it shouldn't have changed i haven't played with any of the adjustments.

thanks for the reply
Reply With Quote
  #4  
Old 26-09-2011, 08:09 PM
Howerton Engineering
Guest
 
Posts: n/a
Default Re: Not Injecting?

What's the SN of the kit? This will be on the FCM int eh engine bay.
Reply With Quote
  #5  
Old 26-09-2011, 08:12 PM
Mini KEG Mini KEG is offline
Junior Member
 
Join Date: Sep 2011
Location: Utah
Posts: 6
Default Re: Not Injecting?

s/n 930158
Reply With Quote
  #6  
Old 28-09-2011, 06:40 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Not Injecting?

Can you put the "PRK" jumper link to TST and see if the system is spraying? Make sure the engine is running to avoid hydrolock - only do it a few seconds a time.
__________________
Richard L
aquamist technical support
Reply With Quote
  #7  
Old 29-09-2011, 01:45 AM
Mini KEG Mini KEG is offline
Junior Member
 
Join Date: Sep 2011
Location: Utah
Posts: 6
Wink Re: Not Injecting?

I checked for leaks and tightened everything up so now the bargraph works. when i drive it the pump makes a clicking sound like it is trying to spray. when placed in tst mode while running everything works. pump sounds normal bargraph reads correctly.

thanks for helping!
Reply With Quote
  #8  
Old 29-09-2011, 10:58 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Not Injecting?

Thanks for the update. Whatever you have tighten seemed to have done the trick.

In Utah spraying meth can be effective, do you notice the difference with meth on and meth off?
__________________
Richard L
aquamist technical support
Reply With Quote
  #9  
Old 29-09-2011, 11:16 PM
Mini KEG Mini KEG is offline
Junior Member
 
Join Date: Sep 2011
Location: Utah
Posts: 6
Default Re: Not Injecting?

Do you know what the clicking sound is? it doesn't sound good... I've never ran it without i am afraid of ruining something. im running 100% in the rmw stroker. i love it!
Reply With Quote
  #10  
Old 09-10-2011, 10:24 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Not Injecting?

Where is the pump mounted?
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:01 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.