waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 07-10-2019, 06:36 PM
Craigorypeck Craigorypeck is offline
Junior Member
 
Join Date: Jan 2019
Location: Alberta
Posts: 12
Default Pulsed output

Hi.
I'm all out of 0-5v analog inputs on my ecu.
I have frequency ins I can use.
What exactly is coming from the white wire on the green harness and whats the best way to use it for logging.
Thanks
Reply With Quote
  #2  
Old 21-10-2019, 04:36 PM
Craigorypeck Craigorypeck is offline
Junior Member
 
Join Date: Jan 2019
Location: Alberta
Posts: 12
Default Re: Pulsed output

I scrapped my Exhaust manifold back pressure sensor and used the 0-5v analogue for the hfs3 logging.
Reply With Quote
  #3  
Old 22-10-2019, 08:04 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Pulsed output

white wire is the raw signal of the flow sensor. The pulse frequency is directly related to the fluid flow. You need to create a high/low table on your ecu to catch the status, flow vs load.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:40 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.