waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and resources > Aquamist systems in details and latest offerings

Reply
 
Thread Tools Display Modes
  #1  
Old 15-09-2012, 09:38 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,781
Default NEW product... checkvalve jets

In order to minimise the dribbling effect immediately after the spray-off period, especially in jet location where there are pressure differences. We have introduce the full range of CVJ (check valve jets) for "direct port", multiple jets such as post IC, pre-IC and pre-turbo.

There is a 1-bar check-valve capsule inside the jet, the assemble is fully serviceable by end user. it is now available.

It is now possible to use multiple jets to any location from one distributing manifold block (see 2nd picture below) without the worry of water inside the lengthy hose being emptied after system stops spraying.





****** Associated components *******









__________________
Richard L
aquamist technical support
Reply With Quote
  #2  
Old 15-09-2012, 07:47 PM
stevieturbo stevieturbo is offline
Senior Member
 
Join Date: Nov 2005
Location: Northern Ireland
Posts: 80
Default Re: NEW product... checkvalve jets

Some nice stuff there !
Reply With Quote
  #3  
Old 16-09-2012, 04:03 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,781
Default Re: NEW product... checkvalve jets

We are planning to life easier for those who wants to run multiple jets.
__________________
Richard L
aquamist technical support
Reply With Quote
  #4  
Old 05-12-2012, 05:31 AM
Dust Dust is offline
Senior Member
 
Join Date: Mar 2007
Location: Frankfort, Kentucky
Posts: 224
Default Re: NEW product... checkvalve jets

You mentioned before that you were looking at going up to 1/4 NPT for the nozzles, did this never happen?
Reply With Quote
  #5  
Old 05-12-2012, 07:32 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,781
Default Re: NEW product... checkvalve jets

Yes, we have them... with internal filter and checkvalve.

__________________
Richard L
aquamist technical support
Reply With Quote
  #6  
Old 27-06-2013, 08:36 PM
JumpingJackson JumpingJackson is offline
Junior Member
 
Join Date: Oct 2010
Location: Utah, US
Posts: 8
Default Re: NEW product... checkvalve jets

Richard, i have some of those new nozzles, with them you included some sort little bronze swirly pieces that look like they go inside the nozzle What are these for?
Reply With Quote
  #7  
Old 30-06-2013, 08:50 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,781
Default Re: NEW product... checkvalve jets

The little swirly parts are for other flow rates in case the CV jets flow too much. They are part of the jet internals.
__________________
Richard L
aquamist technical support
Reply With Quote
  #8  
Old 12-07-2013, 10:01 PM
Wolf_Tm250 Wolf_Tm250 is offline
Member
 
Join Date: Nov 2006
Location: Parma - Italy
Posts: 32
Default Re: NEW product... checkvalve jets

Quote:
Originally Posted by Richard L View Post
In order to minimise the dribbling effect immediately after the spray-off period, especially in jet location where there are pressure differences. We have introduce the full range of CVJ (check valve jets) for "direct port", multiple jets such as post IC, pre-IC and pre-turbo.

There is a 1-bar check-valve capsule inside the jet, the assemble is fully serviceable by end user. it is now available.

It is now possible to use multiple jets to any location from one distributing manifold block (see 2nd picture below) without the worry of water inside the lengthy hose being emptied after system stops spraying.






Are these M8?
Can't find it anywhere.
Thanks
__________________
Wolf_Tm250 [Silat-Kali lover]
TM enduro 250cc 2stroke
Toyota Celica Gt-Four ST205 Snowy White[2.34kg/hp]
Reply With Quote
  #9  
Old 14-07-2013, 04:52 AM
Howerton Engineering Howerton Engineering is offline
manufacture sponsor
 
Join Date: Feb 2009
Location: Northern California
Posts: 334
Default Re: NEW product... checkvalve jets

Yes, they are the same as the standard jet, except about 7-8mm longer.
Reply With Quote
  #10  
Old 14-07-2013, 09:01 AM
Wolf_Tm250 Wolf_Tm250 is offline
Member
 
Join Date: Nov 2006
Location: Parma - Italy
Posts: 32
Default Re: NEW product... checkvalve jets

Quote:
Originally Posted by Howerton Engineering View Post
Yes, they are the same as the standard jet, except about 7-8mm longer.

Thank you.
Are they worth it in case of a dual jet setup spraying both post IC, or just in case of a pressure differential?
__________________
Wolf_Tm250 [Silat-Kali lover]
TM enduro 250cc 2stroke
Toyota Celica Gt-Four ST205 Snowy White[2.34kg/hp]
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 04:17 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.