waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 18-02-2023, 08:12 PM
remski remski is offline
Junior Member
 
Join Date: May 2020
Location: usa
Posts: 2
Default Definition of the restrictor.

Hi.

I've read the manual and it mentions "nearest larger restrictor to regulate the fluid flow so the delivery will be linear to the duty cycle".

What will happen if each restrictor is used (0.5mm,0.7mm,0.9mm, no restrictor) if total flow is 1100cc.

What will it change exactly.



My setup:
4x220cc direct nozzles
200 psi working pressure (with 4 nozzles)
4x1000cc injectors
50/50 mix
Standalone controlled table for the WMI injection. (controling IDC)
(want to add a charge pipe nozzle 0.7mm)

What I am trying to achieve is lower my cc output from my nozzles but keep the pressure thus the spray pattern.
When the system kicks in.. the FAV starts pulsating.. about 2-3 cycles/s.
Assuming (my nozzles 4x220cc) at that point are delivering 150cc/min .
What I want is FAV pulsating 10 cycles/s and delivering 150cc/min.

Can this be done with restrictors.


Thanks
Remski

Last edited by remski; 18-02-2023 at 08:19 PM.
Reply With Quote
  #2  
Old 24-02-2023, 05:57 PM
remski remski is offline
Junior Member
 
Join Date: May 2020
Location: usa
Posts: 2
Default Re: Definition of the restrictor.

Nobody has any clue ?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 03:58 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.