waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 20-07-2022, 05:50 PM
Steve_tt Steve_tt is offline
Junior Member
 
Join Date: Sep 2016
Location: Vancouver
Posts: 2
Default 100% MPS - How to Set Threshold & Gain

I have a modified 997.1 Turbo. I’ve been successfully injecting based on 100% IDC. I’m getting some tuning revisions and would like to switch to injecting by 100% MPS. After I do the soldering, are the THRES and GAIN pots the appropriate trimmers to shape the flow by voltage (boost)? If so,

THRES – Do the 7:00 (full left) and 5:00 (full right) settings correspond with 0V and 5V or 0.5V and 4.5V (as I understand that’s typical for MAP sensors)?

GAIN – Does this modify the slope (after threshold) of the slope provided by (0.5V @ 0% flow) & (4.5V @ 100% flow)? If so, is 11:00 (one left of center) +40% slope and 1:00 (one right of center) -5% slope.

If threshold is set at 2.5V, then 0% flow will start from here?

Thanks,

Steve
Reply With Quote
  #2  
Old 04-09-2022, 10:05 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: 100% MPS - How to Set Threshold & Gain

If THRES is set to 2.5V, the system will start from 25% idc. No flow at 0%
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:49 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.