waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Gasoline Forced-Induction

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-04-2016, 05:49 PM
mrx79 mrx79 is offline
Member
 
Join Date: Aug 2005
Posts: 34
Default EGT Limitation

Hi,

Due to a very small tubrine, my engine is EGT limited. With increased boost and increasing rpm's (redline is about 8000rpm) egt is the limiting factor, even with reasonable ignition advance, so advancing any further is barely an option to reduce egt's any more.

Because the engine is about 8:1cr it's thermal efficiency is also not very high compared to higher cr engines.

So i can use water injection to increase my det. threshold to be able to run more boost, but, 100Water and 50/50WM doesn't lower my egt's (some ppl say it should, but i never noticed it during my logs).

So do you guy's have any ideas what i can do to keep my EGTs low to be able to run the boost with water/WM i'am able to do det. wise?

Thanks in advance
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 08:53 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.