waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-07-2013, 01:26 AM
zx9rmania zx9rmania is offline
Junior Member
 
Join Date: May 2013
Location: europe
Posts: 10
Default HFS4 on 996tt

Hi all,

car is 996tt with gt30s turbos, upgrade fuel system 80cc injectors and trying to run in the end about 1.6 bar or more.

Car is running a bit rich even without meth, lambda set point is 0.8 and actual values are 0.78-0.8 most of the time

i tried with W60/M40 on defaul mapping (IDC) and after that W45/M55 on a custom mapping (MPS) and the same result, i see lambda going down to 0.73, engine load gets very high and engine is coughing

I am told i need to start injecting by 7 psi and full at 15 psi, any thoughts ?

thanks a lot

Fadi
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 07:41 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.