waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > In Cylinder Effects

Reply
 
Thread Tools Display Modes
  #31  
Old 17-02-2013, 07:13 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Post Combustion injection of water

Quote:
Originally Posted by maxc View Post
Can you say that you went about your steam injection with the same flow rates as water injection? Or you never did steam injection as in port steam not DI steam?
Steam injection goes back as far back as water injection. People rapped copper/stainless tube around the exhaust pipe. Water is feed into one end by gravity and the other end into the induction pipe.

[edited]
We really have not looking into steam injection in great details. I really cannot comment how to do it properly. May be just inject a controlled amount of water into a pre-heated mass, steam is then vented into the inlet tract of the engine. I suppose it can be achieved by PWM'ing an inline solenoid valve from a pressurised water supply line.


Judging from some of the technical papers, it has to be quite accurate.
__________________
Richard L
aquamist technical support
Reply With Quote
  #32  
Old 17-02-2013, 10:05 PM
maxc maxc is offline
Member
 
Join Date: Feb 2006
Posts: 59
Default Re: Post Combustion injection of water

My utube channel. http://youtu.be/VZmPlTvv7tk
Reply With Quote
  #33  
Old 18-02-2013, 12:00 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Post Combustion injection of water

I looked but not sure what I should be seeing.
__________________
Richard L
aquamist technical support
Reply With Quote
  #34  
Old 19-02-2013, 03:14 PM
maxc maxc is offline
Member
 
Join Date: Feb 2006
Posts: 59
Default Re: Post Combustion injection of water

Quote:
Originally Posted by Richard L View Post
I looked but not sure what I should be seeing.
A little better. I will make new thread on this. With full details. http://youtu.be/VZmPlTvv7tk
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 07:53 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.