question for Richard L about compatability of hfs-6 and pectel

jacobs323i · #1 17-09-2010, 06:03 PM

hello all i am new to the forum! I have been lurking here for approx. 2 months gathering info. Now finally i am a member and have some questions directed from my tuner about the system. First off all these questions are for Richard l. but if someone has direct experience with this system and pectel standalone engine management please chime in

as your input will be very valuable. So here we go, first Richard have you ever known anyone to use pectel with this system? Secondly do you think this system is right for me (hfs-6) here are my vitals: 660 cc injectors, pectel standalone, all custom intercooler piping, upgraded fuel rail with soon to be an -6 lines, upgraded inline fuel pump 255 lph, fully built bottom end arrow con rods, custom cp pistons, 8.5:1 compression, aem boost controller, gt35r turbo, precision 600 hp intercooler, aem fuel pressure regulator, aem wideband uego controller, fully ported and polished head, competition valves and oversized. car is putting about 290 rwhp with 4.5 punds of boost, plan is to turn it up to around 15 pounds and install w/m kit. Oh almost forgot lol, it is a bmw 323i 99 e46. Tuner's pectel system is fully capable of controlling w/m via engine temps, throttle position, and manifold temps. So i want to buy the hfs-6 kit install everything, but have it controlled by the pectel is this possible? ALso would you be available by phone for my tuner to talk to you as he has more knowledge on what exactly he needs to know?

jacobs323i · #2 17-09-2010, 06:05 PM

oh ya we think with w/m and boost turned up the car will put down around 500 rwhp

Richard L · #3 17-09-2010, 06:22 PM

1) Are you planning to create a custom water flow map from your Patel on one of the spare PWM channels?

2) If this is the case, all you need is a HFS-3.

3) I can be contacted from Monday to Friday after 4pm except Wednesdays.

I cannot estimate power output. From your list, it looks very possible to reach 500hp if your have the correct cam fitted to allow enough air flow to match the gt35.

Richard

jacobs323i · #4 17-09-2010, 09:26 PM

Sorry for the long drawn out, long winded speech. I was rambling and unclear. I am asking:
1.) have you heard of anyone using pectel stand alone with the hfs-6 system?
2.) if so is it compatabile with the hfs-6 system?

yes we want to tune using the pectel, to also control the hfs-6. How can i get a hold of you via phone, what is your number so i can have the tuner call and ask specific questions? Thanks in advance for your time.

Richard L · #5 17-09-2010, 09:54 PM

1) I have not heard of anyone using th eh6 with Patel personally.
2) The HFS-6 can work with and controlled by the patel for sure.

MY phone number ie 01273 581007 during office hours. I would prefer receieving calls after 4pm. I am not in the office on Wednesdays.

jacobs323i · #6 20-09-2010, 04:57 PM

thanks for the support the tuner Neel will be calling you either today or tomm.

jacobs323i · #7 21-09-2010, 08:14 PM

hey richard, the tuner called the number supplied there was no answer. Is this a business line, or a personal line? He called 4pm your time. Maybe i could give you his number and you could call him, he is in california so your time 4pm is ok to call him.

Richard L · #8 21-09-2010, 08:40 PM

Yes please give me your tuner's number via pm, I will call him. I need to know your name that he recongnises.

Richard

jacobs323i · #9 23-09-2010, 02:46 AM

hey richard thanks i just sent a pm but my sent folder says o sent can you please confirm that you got it. If not let me know and i will try again thanks

Richard L · #10 25-09-2010, 09:41 AM

I got it.

the pm system is not working as well as it should. I will look into this. Is ti OK to call the tuner today? I couldn't do it the last few days.