#10
|
|||
|
|||
Re: Audi 2010 S4 Direct Port install HFS-4
Also here is what the seller listed as new/used in the kit:
Pump - USED 6M of 6mm OD nylon hose - New 2M of 4mm OD nylon hose - New HFS-4 Controller - USED 3x 0.8mm jets - USED 1x 4mm Tee - New 2x M8 x 1/8 NPT adapter with plug - New A set of three restrictors with insertion tool - ONLY USED 0.7MM INCLUDED AND INSTALLED IN THE FAV 1x water tank adapter 1/8 BSP, 6mm compression fitting and in-tank filter - New 4x M5x40mm bolts, washers and fasterners for pump - New 1x M6 grounding stud with washer and nuts and 6mm eyelet for pump ground - New 2x 6mm to 3/8 BSP-M pump I/O fittings - USED AND ATTACHED TO THE PUMP 1x 4mm to 1/8 BSP compression fitting for FAV - USED AND ATTACHED TO THE FAV 1x 6mm to 1/8 BSP compression fitting for FAV - USED AND ATTACHED TO THE FAV Blue harness - New Red harness - USED Yellow harness - USED Water level switch with connector - New Dash gauge with cable - New Grey harness - New 1x power harness - New 1x green harness - New User manual -USED |
|
|