#1
|
|||
|
|||
Aquamist pump psi and flow rates...
What psi does your pump run?
What is the max flow rate your injector (your largest one obviously) can flow? I have your 2c kit. But, have yet to install it because it may not meet my needs. I have a single turbo Toyota Supra and have researched WI kits over on Supra Fourms. I saw many posts over there that say your kits cannot flow enough or push enough psi to meet the demand for my application. 20+ psi turbo on a Toyota 2JZ engine pushing over 600rwhp. |
#2
|
|||
|
|||
The Aquamist pump have the following flowrate:
Pump alone: 330cc/min at 6.5bar Pump + 3-cc accumulator: 375cc/min at 6.5bar Pump + Priming pump 580cc/min. See following thread for details: http://www.aquamist.co.uk/phpBB2/viewtopic.php?t=127[/img]
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
__________________
Richard L aquamist technical support |
Thread Tools | |
Display Modes | |
|
|