waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and resources > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #21  
Old 15-10-2019, 08:35 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,882
Default Re: HFS-3 Tests O.K., but No Bar.Graph During.Operation

Tested your return yesterday. nothing wrong.
What next?
__________________
Richard L
aquamist technical support
Reply With Quote
  #22  
Old 15-10-2019, 07:10 PM
BlwnAway BlwnAway is offline
Junior Member
 
Join Date: Feb 2018
Location: St. Louis Mo US
Posts: 13
Default Re: HFS-3 Tests O.K., but No Bar.Graph During.Operation

Honestly I don't know, could it be the electrical portion of the flow sensor assembly?
I know it was clipped onto the flow tube solidly, and am assuming there's no directionality to the clip itself, so that's the only thing else I can think of that would give me actual flow without relaying the info to the gauge.

Is there a test that I can do to see if I'm getting the proper electrical signal through the yellow harness, from the pickup (clip) to the controller connector?
Or can you send me another flow sensor yellow harness when you send my parts back, that I can try, and then send you back this one that's in the car?

Thanks, and let me,
Mark
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 03:54 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.