waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 23-04-2019, 05:17 PM
Jonas_R Jonas_R is offline
Junior Member
 
Join Date: Aug 2013
Location: Denmark
Posts: 1
Default HFS2 vs HFS3 help identifying what i have

Hi,

So I have a controller box that says HFS3-PWM and then I have what corresponds to the HFS2 kit (dash button).

Is it correct that the difference between the HFS2 and HFS3 is the dash button vs dash gauge and flow sensor?

I was unsure if the HFS2 controller box should have a label that says HFS2-PWM or will it say HFS3-PWM?

Problem is I bought it 5-6years ago as a HFS2 kit, so now I'm unsure what I have.

Thanks
Attached Images
File Type: jpg unit etc - Copy (Small).jpg (79.7 KB, 4 views)
File Type: jpg harness - Copy (Small).jpg (76.4 KB, 3 views)
Reply With Quote
  #2  
Old 04-05-2019, 07:28 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: HFS2 vs HFS3 help identifying what i have

The HFS2 uses the same controller as the HFS3. The differences are the contents. It doesn't come with a flow sensor tube, flow sensor cable, no gauge and no gauge cable. It does come with a dash button.

You must be aware of those major difference or clues to help you identify what you have. For some unknown reason you have chosen the controller instead.

If you contact aquamist with w serial number on the controller, they will be able to confirm what you have.

You have a HFS2 system.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:16 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.