waterinjection.info  

Go Back   waterinjection.info > Forum policy and contents > Water/alcohol supplementary technical papers

Reply
 
Thread Tools Display Modes
  #1  
Old 07-04-2016, 05:39 PM
rotrex rotrex is offline
Senior Member
 
Join Date: Jan 2014
Location: Germany
Posts: 149
Default Technical Report - Methanol Vaporization: Effects on Volumetric Efficiency and on Determination of O

http://nepis.epa.gov/Exe/ZyPURL.cgi?Dockey=9100RS9H.TXT


An other interesting paper from the eighties.
it checked what happens to volumetric efficiency, i.e. air density, when you inject methanol upstream of the engine.
theory says that Ve goes up as the evaporation of the methanol cools the air leading to a bigger increase in air density that what the methanol vapour causes a decrease. The vapour needs space.

The result was that Ve actually dropped by 3-5% depending on location.
This was due to the air reheating on the walls of the intake manifold causing it to expand again. The losses are the dilution of the air by the methanol vapour.

So pre-compressor injection a little of water / methanol can actually lead to a loss of power if one is not careful about the configuration. It will help with a hot inlet, but it might hurt with a rather efficient turbo.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:43 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.