#1
|
|||
|
|||
rotory users
I just purchased a nice RX-7 turbo II. It runs about 5psi of boost stock, so that needs to change soon. I know rotories don't like detonation and have planned to use water injection for daily driving. Anyone on here have any tips for water injection in a rotory? Any help would be greatly appreciated!
__________________
18G WRX 358whp Aquamist 2d |
#2
|
|||
|
|||
This is an old thread but full of good infrmation on water injection on the rotary.
http://www.rx7club.com/showthread.ph...hreadid=297240
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
that was a great read. I've encountered a lot of the same kind of water injection poo-pooing locally, I've been quoted lots of corky bells quotes (well, the paragraph he wrote)!
__________________
18G WRX 358whp Aquamist 2d |
#4
|
|||
|
|||
I know Corkey's comment well. hings have come a long way since then.
I believe Jesuscookie is a member of this board, you can pm him to find out more.
__________________
Richard L aquamist technical support |
|
|