waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and resources > Aquamist HFS-4 forum

Reply
 
Thread Tools Display Modes
  #11  
Old 16-06-2017, 07:39 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,558
Default Re: 16 Wrx Map Switching Fail safe

DRI is completely separate from the orange wire.

There are two failsafes on the HFS3:
1. orange wire (TGV pin)
2. Brown and white (BCV related) "never" connect this to the TGV pin.
__________________
Richard L
aquamist technical support
Reply With Quote
  #12  
Old 09-07-2017, 12:36 AM
16-WRX 16-WRX is offline
Junior Member
 
Join Date: Jun 2017
Location: United States
Posts: 7
Default Re: 16 Wrx Map Switching Fail safe

So after having two reputable Subaru tuning shops look into my car with the Aquamist setup I am still having issues. We have triple checked all the wiring/grounds and have tuned for the map switching. We have turned off all the EVAP codes that are popping up. When map switching changes from 0 volts (gauge off) to 5 volts(gauge on)my coolant gauge will drop all the way down as if it's off and read 99 degrees of coolant. When the system is turned back to 0 volts the coolant gauge works perfectly and goes back up to normal temperature. The failsafe is set up properly will work, the unit will read injector duty cycle and spray accordingly. I guess it's time to move on from the system.



2016 WRX FA20
Reply With Quote
  #13  
Old 09-07-2017, 01:34 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,558
Default Re: 16 Wrx Map Switching Fail safe

When you turn off at the gauge, the failsafe will trip unless you remove the DHB link. It is all in the user manual. Did your two reputable tuners know this?
__________________
Richard L
aquamist technical support
Reply With Quote
  #14  
Old 09-07-2017, 02:45 PM
16-WRX 16-WRX is offline
Junior Member
 
Join Date: Jun 2017
Location: United States
Posts: 7
Default Re: 16 Wrx Map Switching Fail safe

Yes I'm fully aware of the fact
Reply With Quote
  #15  
Old 09-07-2017, 03:56 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,558
Default Re: 16 Wrx Map Switching Fail safe

Good.

Have you considered using the 0-5V flow signal (yellow wire of the green harness) to enhance the tune progressively?
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:22 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.