Go Back   waterinjection.info > Other > Gallery - NEW

Thread Tools Display Modes
Old 24-10-2010, 12:21 AM
frotou frotou is offline
Join Date: Sep 2008
Location: quebec, canada
Posts: 0
Default 2D system on celica 7agte

Hi there ;

I want to share with you my long time and hard work project ; I own the car since 10 years and got it serious from 3 years now (performance part) . The engine is a 7afe block with 4age head .

The shorted mods list ;

;hks gt3037 , gt2 wastegate, bov, cam gear and timming belt ; Autronic engine management ; pauter rod with arias piston (9.8/1 CR ) ; custom intake , manifold , exhaust , piping etc ; davies craig electric water pump with controller ; electric power steering pump from renault .

the car ;

electronics boxes ;

the engine ;

intake manifold jet emplacement ; I place the intake temp sensor after the jets but I think it will be heat soaked. I'm not sure if I'll be better to change is location ?

2D system ;

on the car ;

intercooler and oil cooler mount ;

turbo and manifold ;

engine bay ;

I want to run 4x .3 jets with .4 or .5 jet after intercooler . I'm not sure also if the best location for the 5th jet is not just before the throttle body . I have to test the system and plug the dds3 options before running and tune it . Time is against me because I have to store the car for the winter in two weeks . Next year will be the one for the project.

Comments and suggestion are welcome !


Last edited by frotou; 24-10-2010 at 12:24 AM.
Reply With Quote
Old 28-10-2010, 09:53 PM
Fish Fish is offline
Junior Member
Join Date: Aug 2004
Posts: 14
Default Re: 2D system on celica 7agte

Very nice setup there... As for time is running out due to winter! Dont you have a garage out there?

If you're serious about a 5th jet, place it just after the intercooler. This will give an initial pre-cool down before the main throttle body jets.

Reply With Quote
Old 31-10-2010, 11:51 AM
rogerius rogerius is offline
Join Date: Jul 2004
Posts: 9
Default Re: 2D system on celica 7agte

how did you support all that turbo+WG+manifold weight? I could not see any supporting bracket or hanger!
Nevertheless, great setup!!!
Reply With Quote
Old 20-09-2011, 04:20 AM
frotou frotou is offline
Join Date: Sep 2008
Location: quebec, canada
Posts: 0
Default Re: 2D system on celica 7agte

There is a brace from turbo housing bolt to engine support .

I still work on the car ; I have to steal every second I spend on it.

I think I will need pulse strecher because the primming pump not work in the same time as the main pump and the line trap air quickly . I hope this is the solution.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 01:51 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.